Check Point Software Technologies 2205 Manual de usuario descargar pdf (Pagina 17)

Check Point 2200 Appliance Getting Started Guide | 17

Chapter 4

Restoring Factory Defaults

As part of the troubleshooting process, it may be necessary to restore the Check Point 2200 Appliance to its

factory default settings. You can restore the factory default image using one of the following methods:

 Using the WebUI

 Through the console boot menu

Important - Restoring factory defaults deletes all information on the appliance.

In This Chapter

Restoring Using the WebUI 17

Restoring Using the Console Boot Menu 17

Restoring Using the WebUI

To restore the appliance to its default factory configuration using the WebUI:

1. In a Web browser, navigate to

https://<appliance_ip_address>:4434

2. Log in to the WebUI of the appliance with your administrator username and password.

3. In the WebUI, click Appliance > Image Management.

The Image Management window opens.

4. Select the image version to revert to.

5. Click Revert.

Restoring Using the Console Boot Menu

To restore the appliance to its default factory configuration using the console boot menu:

1. Connect the supplied DB9 serial cable to the console port on the front of the appliance.

2. Connect to the appliance using a terminal emulation program such as Microsoft HyperTerminal or

PuTTY.

3. In the HyperTerminal Connect To window, select a port from the Connect using list. Define the port

settings: 9600 BPS, 8 bits, no parity, 1 stop bit.

4. From the Flow control list, select None.

5. Click, Call > Call to connect to the appliance.

6. Switch on the appliance. The appliance begins the boot process and status messages appear in

HyperTerminal.

1 2 ... 12 13 14 15 16 17 18 19 20 21

Sin comentarios

Check Point Software Technologies 2205 Manual de usuario Pagina 17